
10 www.dimplex.com
Figure 3
ACBD
Operation
WARNING: This electric
rebox must be properly installed
before it is used.
Manual Controls
The manual controls for the
replace are behind the access
panel located at the top of the
replace. (Figure 3)
A. On/Off Switch
The replace has a manual power
On/Off switch located on the con-
trol panel of the replace. Toggle
the switch to turn the replace on
and off.
B. Light Dimmer
Turn the ame brightness control
knob to increase or decrease
the brightness of the ame and
embers.
C. Flame Action Control
Turn the ame action control knob
to adjust the ame speed control
to the desired level.
D. Manual Selection Switch
Operates the electric replace
manually. Pressing the switch up
(“
“ position) once turns on the
electric replace and activates
Level 1, twice activates Level 2,
three times activates Level 3.
Pressing the switch down (“
“
position) turns the electric re-
place OFF.
Level 1 : The ame effect
is turned on and the rst red
indicator light illuminates.
Level 2 : The ame effect
remains on, the heater is acti-
vated to the low heat setting,
and the rst and second red
indicator lights illuminate.
Level 3 : The ame effect
remains on, the heater is set
to the high heat setting, and all
Komentáře k této Příručce